Turbine Motor Oil

Turbine motor oils are designed somewhat differently than reciprocating engine oils traditionally used in automobiles. Deposit control and corrosion are not significant issues when formulating a turbine oil, and the shear stresses that turbine oils are exposed to are minimal in light of the fact that turbines are naturally balanced rotating machines unlike reciprocating engines. Turbine oils tend to have the ISO VG range 32, 46, and 68 cSt at 40°C, and make extensive use of polyolester, polyalphaolefin, and Group II as base stock due to the high temperatures they must endure. Varnish is the most problematic contaminant, which can only be detected accurately with the Ultra Centrifuge test resulting in the UC value.In most aviation gas turbine applications, peak lubricant temperatures are not reached during engine operation, but after shutdown, when heat has been able to migrate from the combustor cans and the compressors into the regions of the engine with lubricated bearings and gearboxes. The gas flow associated with running the turbine provides significant convective cooling that disappears when the engine is shut down, leaving residual heat that causes temperatures within the turbine to rise dramatically, an oftenmisunderstood phenomenon.